A shower is one of the most relaxing and calming places in any bathroom. It gives you a place to get clean, enjoy some warm water, and maybe even sing a song or two. There are some shower accessories available on our website that are an often overlooked part of the typical shower. One example of these is the shower seat. The
ASI 0010 Corner Shower Seat is a stall seat that is installed with support brackets made of stainless steel. This seat easily mounts in the corner of the shower and can support up to 300 pounds. If a person with disabilities or someone with trouble standing is using the shower, this is a great place to take a load off while they get clean. Some people need a place to sit and regain strength after standing for so long, especially if the floor of the shower is slippery. Taking a slip and fall can be very dangerous and it is important to make sure that you have all your strength to make sure you dont end up getting hurt or breaking something. This seat comes with a bracket clip that will lower the seat into a horizontal position and when it is not in use you can return it to the vertical position. This makes it easy to keep out of the way if you are one of the people who does not need to use it. This shower seat can be found
here.
Another type of shower seat that we offer is the
ASI 170 Retractable shower seat. This shower seat is made of fabricated 12 gauge stainless steel and 304 stainless steel alloy 18-8 and folds up into a cabinet. This seat has reinforced channels, a wall sub frame, and is welded on masonry anchors. This seat has a self-latching pull handle that is accessible when it is closed. It is easily pulled down to reveal the seat and is easily put back up to close the seat. This means that it will not take up excess room in your shower. We all know showers can be cramped with stuff these days so saving every little bit of room helps. This retractable shower seat is capable of sustaining weight of up to 500 pounds when the walls anchors are attached to something sturdy. This shower seat can be found
here.
We also offer tub seat that can be used in the tub. The
ASI 8358 Folding tub seat is one of these models. It is a fold-up bathtub seat that can support up to 500 pounds. Installation is easy and only requires the following of the diagram and of course sturdy wall mounts. This seat is foldable and will not take up much room in your tub when you are not using it. It is a great idea for people who have trouble getting in and out of the tub because of disability or mobility issues. It is important to have a good amount of strength when getting in and out of the tub because the floor is often slippery when it is wet. This tub seat will help you when you need it most. This tub seat meets and exceeds the requirements of the California Building Code Sections 1115B.6.1.2 for Accessible Bathtubs and 1115B.8.3 for Structural Strength as well as ADAAG requirements that a fabricated product shall be adequate of strength to support a load of 250 pounds minimum. This tub seat can be found
here.
When mounting any shower seat or tub seat make sure it is mounted to a very durable and study mount. The shower seat is really only as strong as the anchors it is attached to so it is important to be careful. A shower or tub seat is a great addition to any modern bathroom and can provide a safe and convenient place to rest and make sure that you dont get hurt. Our site offers a
wide range of options so take a look around and you will surely find exactly what youre looking for.
