- FRAME: one-piece roll-formed stainless steel, 3/4" x 3/4" angle with corners welded, ground and polished smooth to a satin finish. Double strength continuous integral stiffeners on all sides for added strength. Bevel on front of angle secures frame flush against mirror. Two 1/4" barrel butt hinges welded to bottom of frame.
- BACK: galvanized steel, secured to frame with concealed screws.
- MIRROR: first quality 1/4" float glass, triple-silver-plated with electro-copper-plated layer and thermosetting infrared-cured paint backing with Poly-Glaze protective finish. Manufactured in accordance with ASTM C 1036. The back of the mirror is protected by a sheet of 1/4" extruded polystyrene, which is placed between the mirror and the galvanized steel.
- SUPPORT BRACKETS: heavy gauge stainless steel, electro-polished. Self-locking brackets securely riveted to frame.
Verify all rough-in dimensions prior to installation. Secure lower hinges to wall with screws (included) at holes provided. Provide in-wall backing at mounting screw locations. Mount top brackets to permit full arm extension.
Adjustable tilt mirror shall be framed with heavy gauge, one-piece roll-formed 3/4" x 3/4" stainless steel angle with double strength continuous integral stiffeners. Welded corners shall be polished to a uniform satin finish. Mirror shall be of first quality 1/4" float glass guaranteed for 15 years against silver spoilage and protected by a shock-absorbing, waterproof filler with Poly-Glaze protective finish. Self-locking adjustable support brackets shall be polished stainless steel and riveted to frame.
Consult local and national accessibility codes for proper installation guidelines.
Conformity and compliance to local and national codes is the responsibility of the installer.
Washroom Accessories Warranty:
Bradley Corporation warrants to commercial and institutional purchasers only each new Bradley washroom accessory unit purchased from us to be free from defects in materials and workmanship under normal use and service upon the following terms and conditions: This warranty is limited to replacing or repairing, at our option, transportation charges prepaid by the purchaser, any Bradley washroom accessory unit or part thereof which our inspection shall show to have been defective within the limitations of this warranty.
The period during which Bradley accessory units are warranted is as follows, measured from the date of our invoices:
Complete unit, excepting mirrors - one (1) year.
Stainless Steel Mirror Frames - fifteen (15) years against corrosion.
Plate Glass Mirrors - fifteen (15) years against silver spoilage.
Hand/Hair Dryers - ten (10) years (see DRYER WARRANTY).
Tempered Glass Mirrors - five (5) years against silver spoilage.
Laminate Glass - five (5) years against silver spoilage.
Polished #8 Architectural Grade Finish on 304 Series Stainless Steel - one (1) year against corrosion.
Bright Annealed Finish on 430 Series Stainless Steel - one (1) year against corrosion.
This warranty does not cover installation labor charges and does not apply to any units which have been damaged by accident, abuse, improper installation, improper maintenance, or altered in any way.
The replacement or repair of defective Bradley washroom accessory units as stated in this warranty shall constitute the sole remedy of the purchaser and the sole liability of Bradley Corporation under this warranty.
BRADLEY CORPORATION SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES CAUSED BY DEFECTS IN BRADLEY WASHROOM ACCESSORY UNITS OR ANY DELAY IN THE REPAIR OR REPLACEMENT THEREOF.
This warranty extends only to commercial and institutional purchasers and does not extend to any others, including consumer customers of commercial and institutional purchasers.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR OTHERWISE.
Product Maintenance Instructions